Bielomatik Binding System - 1st Way Cut & Register Area

Bielomatik Binding System

1ST WAY CUT & REGISTER AREA

In this example, we are cycling forward 3 inches, then making a 1ST WAY CUT. The result is a strip that is 3-up, and measures 3”(7.62cm) x 18 ¼”(46.35cm) – see diagram, below.

The 3-up strip is then registered and squared, front and back and side to side.

After the strip leaves the 1st Way Cut area, it is monitored by the SKEW DETECTORS each time it has completed a cycle forward. If a skew is detected at any time, the machine will STOP before damage to the product occurs.

1-800-990-2440 or (785) 256-4114