|
|
 |
|
|
 |
|
Brackett
Circular Padder Specifications
|
|
|
| |
The Brackett Circular Padder is a clean,
efficient method of producing professional pads and
multiple pad strips - up to one-inch thick (25.4mm)
and 19 inches (482.6mnm) long. Stacks
of paper sheets (usually with chipboard stiffeners)
are bonded together by a thin application of hot melt
adhesive.
-
Pad
Maximum Length: 19"
standard
-
Pad
Maximum Thickness: 1"
standard
-
Glue
Application System:
Digital Temperature Display with controller and
7 day timer. Variable temperature setting: 250°-400°F
(120°-205°C). Capacity: 8 lbs. (3.63kg).
-
Speeds:
Machine speeds variable to 3400 units per
hour.
-
Production:
Average production is 1800 units (pads or multiple
pad strips) per hour. Actual output is determined
by pad thickness and operator feeding dexterity.
-
Main
Drive: 1/2 HP permanent magnet DC drive
motor with solid state SCR controls for variable
speed adjustment.
-
Standard
Power Requirements: 1 Phase, 20 Amps, 115V,
60 Hz.
Available
Options:
- Roughing
Assembly: Motor driven edge rougher. Aids preparation
of difficult-to-bind materials, such as coated stock.
For any product benefiting from greater glue applications
and penetration. 220/240V only.
- Pad
Cooler: Permits faster cooling (and set-up)
of padded surfaces when high production is required
or for pads thicker than one-inch. OPTIONAL CHILLER:
for unusually thick pads.
- Nip
Jaws: Allows
for variation in pad thickness when drop leaf carbon
sets are being padded.
- Cut
Down Jaws: Pocket
height is reduced to assist in feeding short materials
- minimum height of three-inches (76.2mm).
- Thick
Work Clamp Jaws: Allows
padding of materials up to 3-inches thick (76.2mm).
- Greater
Maximum Length:
For padding materials up to 24-inches(609mm) in length,
an alternate Model CP-24" is available.
- Conveyor:
8
foot long belted conveyor.
|
|
|
| |
1-800-990-2440
or (785) 256-4114
|
|
|
| |
|
|
|
