PFE - Heath Pak to Pak Model T-T Specifications

Heath Pak to Pak Model T-T Specifications

2-tower 2-turret Pak-to-Pak Continuous Press

ONE MINUTE MAKEREADY
Runs with (magnetic or sticky-back) photo polymer plates.
Imprinting or crash printing and MICR numbering 1-color.

Minimized down time:
Locate plates and set numbers on idle cylinder while active
cylinders are printing and numbering.

Turret changes 30-seconds
Size: 3-inches to 14-inches in less than 10-seconds,
16-inches wide.
Change size without changing cylinders

Capable of running 4-jobs of 1000 per hour with a minimum
waste of 15 feet of pre-processed continuous paper.

FLEXIBLE
This is truly a flexible press. It prints from photo
polymer plates. It runs sizes from 3 to 14inches
in depth - up to 16-inches wide. It will print perf to
perf with no gap. Repeat length can be changed
with the tap of the keyboard.

No Cylinders to change
The Model TT is excellent for crash printing multiple
part checks, invoices and forms. Two cylinders
rotating face to face give excellent copies on parts
2, 3 & 4 from polymer plates.

FAST PLATE CHANGE • FAST PAPER CHANGE
FAST NUMBERING CHANGE

FLOOR PLAN LAYOUT

Note: Some items shown on layout are optional
and may not be included on available press(es).

GENERAL SPECIFICATIONS FOR MODEL T-T

Maximum Repeat Length	14"
Minimum Repeat Length	2"
Repeat Length Change Increment	1/60"
Maximum Image Length	13 1/2"
Blanket Gap	None
Maximum Image Width	15"
Maximum Web Width	16 7/8"
Run Speed (variable)	3500 to 8000 IPH
Crash Print/Crash Numbering Capability	One to Four ply
Numbering shaft circumference	17"
Main Drive Motor	3.0 Hp AC
Power Requirement	230VAC/50Hz/60Hz 3 Phase/30 amps
Air Requirement (requires air compressor)	1.0 Scfm @ 100 psi
Shipping weight (approximately) Two Tower only	3500 Lbs.
Dimensions (L x W x H) Two Tower only	102" x 52" x 64"

Please visit the Pak-to-Pak Press Inventory List
for photos of current presses we are offering
or to request more information.

Back to Pak-to-Pak Inventory List

1-800-990-2440 or (785) 256-4114