This Heidelberg MO-E Offset Printing Press is very clean and well maintained. One owner (a university) they put new rollers on last year.
It has 19,712,045 on the Impression counter. It has Conventional Dampening. Comes with: Operating Manual, Wiring Diagrams, Spare Parts Book, 6 Delivery Trays, 2 Feeder Trays and Miscellaneous parts.

• Largest Sheet: 480 x 650 mm / 19 x 25 1/2 inches
• Smallest Sheet: 140 x 210 mm / 5 1/2 x 8 1/4 inches
• Maximum image area: 472 x 645 mm / 18 37/64 x 25 3/8 inches
• Gripper margin: 8-10 mm / 5/16-3/8 inches
• Maximum speed: 8000 sheets per hour
• Minimum speed: 3500 sheets per hour
• Cylinder diameter: 220 mm / 8 21/32 inch

Stock range handled (Average values; vary with stiffness and direction of grain):

• Min. sheet thickness: Onion skin
• Max. sheet thickness: 0.6 mm / 0.024 inch
• Min. sheet weight: 25 g/m²
• Max. sheet weight: ...400 g/m²

Plates

• Length: 550 mm / 21 5/8 inch
• Width: 650 mm / 25 1/2 inch
• Thickness: 0.15-0.5 mm / 0.006-0.02 inches
• Margin (plate edge to image): 47.6 mm / 1 7/8 inches

Blanket

• Length: 565 mm / 22 1/4 inch
• Width: 682 mm / 26 7/8 inch
• Thickness: 1.9 mm / 0.075 inch
• Cylinder undercut: 3.2 mm / 0.126 inch

Inking Unit

• Form inking rollers (per unit): 4

Pile heights (Top face of pile board to top face of pile)

• Feeder: 600 mm / 23 5/8 inch
• Delivery: 510 mm / 20 1/8 inch

• Model: MO-E
• Serial Number: 612093
• Year: 1991
• Electrical:
  • 230 V
  • 60 Hz
  • 15.1 Amp/6.0 kW
  • 3 Ph
  • IR Dryer: 25 Amp
• Vacuum Pump:
  • 230 V
  • 60 Hz
  • 4 Amp