All
units are inserts (towers, punch, cross perf.)
Turnbars after tower #1
Towers have 22” print inserts in them.
File hole punch insert with #74685-2 stamped on the
operator side frame. File hole punch configuration
per drawing should be 28” repeat, 2,4, and 8
around 2-3/4” or 4-1/4”
Line
hole punch insert. Line holes have 3 sets of Schroeber
type upper and lower rings.
Two 22” cross perf. insert with heater. This
style has the perf. cyl. and the anvil in the insert.
First has 8 slots with manual clamp bars, Second has
6 slots with manual clamp bars.
Fed
by 480 v 3 phase 100A circuit. Actual amp draw was
42 amps
