GUILLOTINE
WITH AUTOMATIC CLAMP AND AND PROGRAMMABLE »EP«
POWER BACKGAUGE
• 475 mm (18.7") cutting length
• Electro-mechanical blade and clamp drive
• Power backgauge with ”EP“ backgauge
control module
• Electronic hand wheel for manual backgauge positioning
with infinitely variable speed control (from very slow to
very fast)
• Optical cutting line indicator with bright and durable
LEDs
• Adjustable backgauge with narrow separations and
plastic gliders
• Two side lays each on front and rear tables
• High-quality blade made from “Solingen steel”
• Solid steel blade carrier and adjustable blade guides
• Automatic clamping system, guided on both sides
for evenly distributed clamping pressure (clamp can be lowered
or raised independently from blade)
• Solid all-metal construction
• Complete with stand and storage shelf
SCS
(Safety Cutting System):
Hinged, electronically controlled safety guard on the front
table; transparent safety cover on the rear table; main
switch and safety lock with key; electronically controlled
true two-hand operation; 24 volt controls (low voltage);
patented IDEAL safety drive; automatic blade and clamp return
from every position; disc brake for instant blade stop;
blade changing device with covered cutting edge; blade depth
adjustment from the outside of the machine; easy blade change
from the front of the machine without removing covers.
PROGRAMMABLE
»EP« CONTROL MODULE FOR THE POWER BACKGAUGE:
Digital display for measurement readout in cm or inches
(display accurate to 1/10 mm or 1/100 inch)
• 10-button key pad for presetting of measurement
• Memory key for repeat cuts
• 99 programs with 99 steps in each program (up to
9 repeat cuts can be integrated into a program as one single
program step)
• Setting of program steps via “Start”
button
• “SET” function key for reference measurement
• Programmable EJECT function – for pushing
out the paper
• Two programmable keys for quick setting of frequently
needed measurements
• Self-diagnosis system with error indication on display
Cutting
length (mm) 475 (18.7")
Cutting height (mm) 80 (3.15")
Table depth (mm) 450 (17.72")
Narrow cut (mm) 35 (1.38")
“EP”
BACKGAUGE CONTROL
Fully programmable backgauge control module with digital
measurement readout, 10 push button key pad, and memory
key
for repeat cuts.
PUSH
BUTTON CONTROL
Push buttons allow, that the automatic clamp can be moved
up and down independent of blade movement.
LED
OPTICAL CUTTING LINE
The optical cutting line with bright, durable LEDs shows
where the cut will be performed and helps to align cutting
marks
precisely for accurate cuts.
ELECTRONIC
HAND WHEEL
Electronic hand wheel for manual backgauge positioning
with infinitely variable speed control (from very slow to
very
fast).
