Padder With Accumulator Conveyor
padding materials up to 19-inches (482mm)
in length, please ask for information on
the model CP-19. For materials up to 24-inches(609mm)
in length, there is an alternate Model CP-24.
(Note: Rebuilt & Refurbished machines
are subject to availability. If you are looking
for a brand new machine we can quote that
for you also. Please contact us with your
to handle any thickness from two sheets min.
to 1" max. standard (2.54 cm), optional
up to 3" (7.62 cm).
length from 3" min. (7.62 cm) to 19" (48.26
cm) on the 19" model, and 24" (60.96
cm) on the 24" model.
height from 3" (7.62 cm) min to 14" (35.56
Temperature Display with controller and 7 day
timer. Variable temperature setting: 250°-400°F
(120°-205°C). Capacity: 8 lbs. (3.63kg).
Speeds variable to 3,400 units per hour. Speed
control is located on the control box.
production is 1,800 padded strips per hour.
HP permanent magnet DC drive motor with solid
state controls for speed adjustment.
amps at 115v, 50/60 hz, 1 Phase. 15 amps at
220v 50/60 hz, 1 Phase
Motor driven edge rougher. Aids preparation
of difficult-to-bind materials, such as coated
stock. For any product benefiting from greater
glue applications and penetration. 220/240V
water pot option permits faster cooling (and
set-up) of padded surfaces when high production
is required or for pads thicker than one-inch.
An OPTIONAL CHILLER is available for unusually
optional jaw allows for variation in pad thickness
when drop leaf carbon sets are being padded.
cut-down jaw option reduces pocket height to
assist in feeding short materials - minimum
height of three-inches (76.2mm).
Work Clamp Jaws:
option that allows padding of materials up
to 3-inches thick (76.2mm).
foot long belted conveyor. (optional)